How to Clean Skateboard Bearings

how to clean skateboard bearings

Learning how to clean skateboard bearings is the first step to keeping your board in the best condition possible. Bearing grease from riders can get into your bearings if they are not maintained regularly. Before any cleaning can be done, it is important to remove dirt and debris from the bearings before the process begins.


Some of the first steps on learning how to clean skateboard bearings are to take off the wheels. The bearings will then be exposed to the elements and can be cleaned easily.


Once the wheels are removed, make sure to dispose of the motor. This could have either been the cause of the problem or another part that was faulty. It is always important to find out exactly what the problem is before attempting to change the bearings.


Removing the wheels does not always mean taking them all off. If a few of the wheels are still in place, then they can be removed. Use a wheel cleaner and make sure that it is evenly distributed over the entire wheel.


On some bearings, the o-ring will come loose when removing them. This will then allow water to accumulate under the bearing. Cleaning this area may involve taking off the whole assembly and washing it down with a wet rag. This is a common source of dirt and debris.


You can also remove the o-ring if it has been damaged. If you know that this is the case, you may need to replace the o-ring. Make sure that the bearing is completely dry before cleaning the area.


Be aware that there are cleaners that are specifically designed for skateboard bearings. It is always best to use one of these before attempting to clean bearings by hand. Be careful when using them as well.


It is a good idea to use something that is environmentally friendly and non-toxic. Many people like to avoid using any chemicals or products that may harm the environment. Skateboard bearings are no exception.


You may want to use a paddle or brush when cleaning skateboard bearings. These surfaces are not only easy to clean but also do not contain harsh chemicals. A paddle is a great idea if you have small children around. If you are attempting to clean a larger skateboard that may have a lot of bearings, a brush can be used.


In order to clean skateboard bearings, you may need to remove the wheel. Be sure to clean the outer edges where the bearings to attach to the wheels. A small amount of lubricant can be applied to get rid of any dirt. Make sure that the lubricant is left on the outer edge of the bearing.


The inner edges of the bearing will require you to use a cleaner and brush. You will want to be sure to clean the area thoroughly. Using a rag will help clean the grime off of the surface of the bearings.


Learning how to clean skateboard bearings can save you from having to replace them at an expensive cost. If you are not careful, you may damage the bearings in the process. If this happens, you will need to replace them all.